background image

144

WARRANTY

HOW TO OBTAIN WARRANTY SERVICE

If your vehicle requires warranty service, you must take it to a POLARIS Servicing 
Dealer. When requesting warranty service you must present your copy of the Warranty 
Registration From to the dealer. (THE COST OF TRANSPORTATION TO AND 
FROM THE DEALER IS YOUR RESPONSIBILITY). POLARIS suggests that you use 
your original selling dealer; however, you may use any POLARIS Servicing Dealer to 
perform warranty service.

In the country where your product was purchased:

Warranty or Service Bulletin repairs must be done by an authorized POLARIS dealer. If 
you move or are traveling within the country where your product was purchased, 
Warranty and Service Bulletin repairs may be requested from any authorized POLARIS 
dealer that sells the same line as your product.

Outside the country where your product was purchased: 

If you are traveling temporarily outside the country where your product was purchased, 
you should take your product to an authorized POLARIS dealer. You must show the 
dealer photo identification from the country of the selling dealer’s authorized location as 
proof of residence. Upon residence verification, the servicing dealer will be authorized 
to perform the warranty repair.

If you move:

If you move to another country, be sure to contact POLARIS Customer Assistance and 
the customs department of the destination country before you move. Product 
importation rules vary considerably from country to country. You may be required to 
present documentation of your move to POLARIS in order to continue your warranty 
coverage. You may also be required to obtain documentation from POLARIS in order to 
register your product in your new country. You should warranty register your product at 
a local POLARIS dealer in your new country immediately after you move to continue 
your warranty coverage and to ensure that you receive information and notices regarding 
your vehicle.

If you purchase from a private party:

If you purchase a POLARIS product from a private party, to be kept and used outside of 
the country in which the product was originally purchased, all warranty coverage will be 
denied. You must nonetheless register your product under your name and address with a 
local POLARIS dealer in your country to ensure that you receive safety information and 
notices regarding your product.

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for Sportsman 850 2014



























































































































































Reviews: