manualshive.com logo in svg

Polaris Sportsman 850 2014, Owner'S Manual

Share
Download
Polaris Sportsman 850 2014 Owner'S Manual Download Page 133

132

MAINTENANCE

Cleaning and Storage

Accessories

Auxiliary power outlets provide 12-volt power for operating 
accessories. Accessory outlets are available for all models. POLARIS 
also has a wide range of additional accessories available for your 
vehicle. Always install accessories that are approved by POLARIS for 
your vehicle. Please see your POLARIS dealer.

Transporting the Vehicle

Follow these procedures when transporting the vehicle.

1. Stop the engine.

2. Place the transmission in PARK.

3. Lock the parking brake.

4. Secure the fuel cap, oil cap and seats.

5. Always tie the frame of the vehicle to the transporting unit securely 

with suitable straps or rope. Do not attach tie straps to the front A-
arm bolt pockets, racks or handlebars.

6. Remove the key to prevent loss during transporting.

Downloaded from 

ManualsNet.com

 search engine

Summary of Contents for Sportsman 850 2014



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands