Polaris Slingshot R 2020, Owner'S Manual

Page: 74 / 173

ENGINE AND DRIVETRAIN BREAK-IN
NOTICE
Failure to properly follow the engine break-in procedures outlined in this
manual can result in serious damage to the engine. Follow all break-in
procedures carefully. Avoid full-throttle operation and other conditions that may
place an excessive load on the engine during the break-in period.
1. Fill the fuel tank with gasoline. Heed the fuel warnings in the Fuel and
Exhaust Safety section and the Fuel Recommendation section.
2. Check the oil level. See the Engine Oil Level section for details. Add the
recommended oil as needed to maintain the oil level between the safe and
add marks.
3. Vary speed. Do not drive at a constant speed, whether fast or slow. Do not
drive at sustained idle.
4. Avoid full-throttle starts and do not drive at full throttle.
5. Do not exceed 70 MPH (113 km/h).
6. Avoid the use of downshifting to brake or slow the vehicle.
7. Avoid making hard stops for the first 200 miles (322 km).
8. Perform regular checks on fluid levels, controls and areas outlined on the
daily pre-ride inspection checklist. See the Pre-Ride Inspections section for
details.
9. Change both the engine oil and filter at 500 miles (800 km).
72
OPERATION