Polaris RZR XP 4 TURBO S VELOCITY 2019 Owner'S Manual For Maintenance And Safety Download Page 147

Page: 147 / 222

14. Unlock the dipstick lever

. Remove the dipstick and wipe it dry with a clean

rag.

15. Reinstall the dipstick to fully seat it. Do not lock the dipstick.

NOTE

Make certain the dipstick is inserted all the way down to ensure an accurate

reading.

16. Remove the dipstick and check the oil level.

17. Add the recommended oil as necessary to bring the oil level within the SAFE

range (between the holes) on the dipstick. Do NOT overfill.

NOTE

A rising oil level between checks during cold weather operation can indicate

contaminants such as gas or moisture collecting in the crankcase. If the oil

level is over the upper mark, change the oil immediately.

18. When finished, reinstall dipstick and lock the lever.

19. Reinstall the cargo box access panel, engine service panel, and seats.

20. Dispose of used oil, filter, and rags properly.

145

MAINTENANCE

Summary of Contents for RZR XP 4 TURBO S VELOCITY 2019































































































































































































































Search results

Summary of Contents for RZR XP 4 TURBO S VELOCITY 2019

Reviews:

Related manuals for RZR XP 4 TURBO S VELOCITY 2019

Brands by name

Popular brands

Polaris RZR XP 4 TURBO S VELOCITY 2019, Owner'S Manual For Maintenance And Safety

Search results

Summary of Contents for RZR XP 4 TURBO S VELOCITY 2019

Reviews:

Related manuals for RZR XP 4 TURBO S VELOCITY 2019

Brands by name

Popular brands