manualshive.com logo in svg

Polaris RiderX PIDD, Owner'S Manual, Page: 8 / 86

Share
Download
Polaris RiderX PIDD Owner'S Manual Download Page 8

7

Interactive Digital Display

The PIDD features a 4.3-inch high resolution full color 
LCD display that provides access to the following 
information and functions.

Performance

View the speedometer, tachometer, dual trip meters, 
odometer.

Operating Conditions

View fuel level, coolant temperature, battery voltage, 
gear position, all-wheel drive status, diagnostics and 
maintenance warnings.

Riding Conditions

View the clock, change display settings.

Bluetooth Functionality

Use Bluetooth-enabled communication with cell phone 
(with notification of incoming calls and texts, and ability to 
view battery strength and signal strength).

GPS/Mapping

Use the compass and full-featured GPS when the GPS 
receiver is installed (includes the display of latitude, 
longitude and elevation). Mark and save waypoints and 
tracks.

Security (Snowmobiles)

If security is enabled, lock your vehicle using a security 
code.

Screen Options

Customize screens.

NOTE: The compass is controlled by the GPS 
system. Calibration is not required.

Summary of Contents for RiderX PIDD























































































Reviews:

No comments