manualshive.com logo in svg

Polaris RiderX PIDD, Owner'S Manual, Page: 70 / 86

Share
Download
Polaris RiderX PIDD Owner'S Manual Download Page 70

69

Register an PIDD (Rider or Dealer)

Be prepared to provide the following information when 
registering an PIDD:

• The vehicle’s Vehicle Identification Number (VIN) 

(see the vehicle’s owner’s manual for location)

• The PIDD serial number (located in the Systems 

Info display on the PIDD) (see page 33)

1. Log in at RiderX.com.
2. Select 

Digital Displays

 in the menu bar.

3. If you are a Polaris dealer, check the box next to “I 

have a dealer number”. Enter your 7-digit dealer 
number. 

4. Click on 

Register My Display

.

Update Trails Data or Maps/Trails Data

The Trails data and the Maps/Trails data on your PIDD 
can be updated using files downloaded from your RiderX 
account. 

An update involves four (4) procedures:

• Download the data
• Copy files to a USB flash drive
• Update the PIDD
• Verify the update appears in SYSTEM INFO and in 

the MAPS/TRAILS display.

Each procedure is outlined in detail on the following 
pages. For future reference, a condensed version of the 
entire update process is provided in a flow chart on page 
78.

NOTE: When a user (rider or dealer) logs in to a 
RiderX account, the user information for that account 
will automatically populate the online registration 
form.

NOTE: Trails data expires 90 days from the file’s 
release date.

NOTE: Before updating the PIDD, fully charge the 
vehicle’s battery (if equipped). A 12-volt minimum is 
required for completing the updates.

Summary of Contents for RiderX PIDD























































































Reviews:

No comments