Polaris RANGER XP 1000 2020, Owner'S Manual

Page: 58 / 156

ITEM REMARKS PAGE
Tires Inspect condition and pressure page 111
Wheels/fasteners Inspect, ensure fastener tightness page 111
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Drive Belt Inspect, ensure installed correctly -
Fuel and oil Ensure proper levels
Coolant level Ensure proper level page 96
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation page 36
Indicator lights/switches Ensure proper operation
page 32
Intake pre-filters Inspect, clean -
Headlamps Check operation, apply POLARIS dielectric
grease when lamp is replaced page 113
Brake light/tail lamps Check operation -
Seat Latch Push down on the seat back to ensure the latch
is secure -
Seat Belt Check length of belt for damage, check latches
for proper operation page 37
Cab Doors (if equipped) Check doors and latches for wear or damage. -
Grass and leaves Remove grass, leaves, and other flammable
material or debris, especially near the exhaust
system. -
STARTING THE ENGINE
1. Position the vehicle on a level surface outdoors or in a well-ventilated area.
2. Sit in the driver's seat and fasten the seat belt. Always make sure all cab
doors are closed and latched when riding in this vehicle.
3. Place the transmission in PARK or NEUTRAL.
4. Engage the park brake.
5. Apply the brakes. Do not press the throttle pedal while starting the engine.
56
OPERATION
Downloaded from ManualsNet.com search engine