Polaris Ranger RZR Owner'S Manual For Maintenance And Safety Download Page 41

Page: 41 / 146

FEATURES AND CONTROLS

Cab Nets

Your vehicle is equipped

with upper and lower cab

nets on both sides of the

vehicle. Cab nets must be

used by both operator and

passenger at all times. Make

sure all latches are secure

before operating the vehicle.
Always inspect cab nets for

tightness, wear and damage

before each use of the vehi-

cle. Use the strap adjusters

to tighten any loose straps.

Promptly replace worn or

damaged cab nets with new

cab nets, available from your

authorized Polaris dealer.

Upper Cab Net Interference (Driver)

The upper cab net on the driver’s side may interfere with vehicle opera-

tion for some operators due to operator body type, driving style or riding

apparel. Each operator must check for upper cab net interference before

operating the vehicle.
1. Complete the New Operator Driving Procedures outlined on pages

60-61.

2. Test for upper cab net interference by making slow speed turns to

the left and right. If the net interferes with operation, it should be

removed from the vehicle

for this operator only

. All other cab nets

must remain on the vehicle during operation. See page 39.

WARNING

Riding in this vehicle without using the cab nets can result in serious injury or

death in the event of an accident or overturn. Always use the cab nets while

operating the vehicle.

Upper Cab Net

Lower Cab Net

Latches

Summary of Contents for Ranger RZR



















































































































































Search results

Summary of Contents for Ranger RZR

Reviews:

Polaris Ranger RZR, Owner'S Manual For Maintenance And Safety, Page: 41 / 146

Search results

Summary of Contents for Ranger RZR

Reviews: