Polaris Ranger RZR Owner'S Manual For Maintenance And Safety Download Page 18

Page: 18 / 146

SAFETY

Safe Riding Gear

Helmet

Wearing a helmet can prevent a severe head injury. Whenever riding this

Polaris vehicle, always wear a helmet that meets or exceeds established

safety standards.
Approved helmets in the USA and Canada bear a U.S. Department of

Transportation (DOT) label.
Approved helmets in Europe, Asia and Oceania

bear the ECE 22.05 label. The ECE mark consists

of a circle surrounding the letter E, followed by the

distinguishing number of the country which has

granted approval. The approval number and serial

number will also be displayed on the label.

Eye Protection

Do not depend on eyeglasses or sunglasses for eye protection. When-

ever riding a Polaris vehicle, always wear shatterproof goggles or use a

shatterproof helmet face shield. Polaris recommends wearing approved

Personal Protective Equipment (PPE) bearing markings such as VESC

8, V-8, Z87.1, or CE. Make sure protective eye wear is kept clean.

Gloves

Wear gloves for comfort and for protection from sun, cold weather and

other elements.

Boots

Wear sturdy footwear. Do not ride a Polaris vehicle with bare feet.

Clothing

Wear long sleeves and long pants to protect arms and legs.

051039

0006.31

Summary of Contents for Ranger RZR



















































































































































Search results

Summary of Contents for Ranger RZR

Reviews:

Polaris Ranger RZR, Owner'S Manual For Maintenance And Safety, Page: 18 / 146

Search results

Summary of Contents for Ranger RZR

Reviews: