manualshive.com logo in svg

Polaris Ranger RZR, Owner'S Manual For Maintenance And Safety, Page: 24 / 146

Share
Download
Polaris Ranger RZR Owner'S Manual For Maintenance And Safety Download Page 24

21

SAFETY

Rider Safety

WARNING

POTENTIAL HAZARD
Using accessories not approved by Polaris for use on this vehicle
WHAT CAN HAPPEN
Loss of control, accident or overturn resulting in serious injury or death
HOW TO AVOID THE HAZARD
Never operate with accessories not approved by Polaris for use on this 

vehicle. Non-approved accessories may seriously affect vehicle stability.

WARNING

POTENTIAL HAZARD
Operating this vehicle on paved surfaces, including sidewalks, paths, parking 

lots, and driveways
WHAT CAN HAPPEN
Loss of control and accident resulting in serious injury or death
HOW TO AVOID THE HAZARD
This vehicle's tires are designed for off-road use only, not for use on 

pavement. Paved surfaces may seriously affect handling and control of the 

vehicle, and may cause the vehicle to go out of control.
Avoid operating the vehicle on pavement. If you must operate on a paved 

surface, travel slowly and do not make sudden turns or stops.

WARNING

POTENTIAL HAZARD
Operating this vehicle on public 

streets, roads or highways
WHAT CAN HAPPEN
Collision with another vehicle
HOW TO AVOID THE HAZARD
Never operate this vehicle on any 

public street, road or highway, 

including dirt or gravel.
In many areas it's illegal to 

operate vehicles of this type on 

public streets, roads and 

highways.

Summary of Contents for Ranger RZR



















































































































































Reviews:

No comments