Polaris RANGER EV 2022 Page 66 Owner'S Manual Download

Page: 66 / 125

TOWING LOADS

WARNING

Towing improperly can alter vehicle handling and may cause loss of control or

brake instability.

Always follow these precautions when towing:

1. Never load more than 150 lbs. (68.1 kg) tongue weight on the towing bracket.

2. Do not operate the vehicle faster than 10 MPH (16 km/h) when towing.

3. Towing a trailer increases braking distance. Do not operate the vehicle faster

than 10 MPH (16 km/h) when towing.

4. Vehicle speed should never exceed 5 MPH (8 km/h) when towing loads in

rough terrain, while cornering, or while ascending or descending a hill.

5. Do not tow more than the recommended weight for the vehicle.

6. Attach a trailer to the trailer hitch bracket only. Do not attach a trailer to any

other location, which could result in loss of control of the vehicle.

7. The total load (operator, passenger, accessories, cargo and weight on hitch)

must not exceed the maximum weight capacity of the vehicle.

Total Towed Load Weight (Level Ground)

1500 lbs.

(681 kg)

Total Towed Load Weight (15° grade)

850 lbs.

(386 kg)

Total Hitch Vertical Weight

150 lbs.

(68.1 kg)

Maximum Towing Speed

10 MPH

(16 km/h)

Maximum Towing Speed (Rough Ground,

Cornering, Ascending / Descending)

5 MPH

(8 km/h)

OPERATION

Summary of Contents for RANGER EV 2022






























































































































Search results

Summary of Contents for RANGER EV 2022

Reviews:

Related manuals for RANGER EV 2022

Brands by name

Popular brands

Polaris RANGER EV 2022, Owner'S Manual

Search results

Summary of Contents for RANGER EV 2022

Reviews:

Related manuals for RANGER EV 2022

Brands by name

Popular brands