Polaris RANGER EV 2022 Owner'S Manual Download

Page: 94 / 125

INDICATOR LAMP REPLACEMENT

To replace the indicator lamp, do the following:

1. Lift the hood.

2. Reach in behind the console panel and lift the release to unplug the light

from the harness.

3. Using a flathead screwdriver, press on the tab on the top of the light to

remove the indicator light assembly from the console panel.

4. Locate the expired lamp. Using a screwdriver, rotate the lamp 1/4 turn

counter-clockwise.

5. Grip the lamp with a needle-nose pliers and remove it from the assembly.

6. Install the new lamp. Using a screwdriver, rotate the lamp 1/4 turn clockwise

to seat it.

7. Snap the assembly back into the console panel. Reconnect the harness.

8. Close the hood.

MAINTENANCE

Summary of Contents for RANGER EV 2022






























































































































Search results

Summary of Contents for RANGER EV 2022

Reviews:

Related manuals for RANGER EV 2022

Brands by name

Popular brands

Polaris RANGER EV 2022, Owner'S Manual

Search results

Summary of Contents for RANGER EV 2022

Reviews:

Related manuals for RANGER EV 2022

Brands by name

Popular brands