Polaris RANGER 500, Owner'S Manual

Page: 59 / 152

DRIVING ON SLIPPERY SURFACES
WARNING
Skidding or sliding can cause loss of control or rollover (if tires regain traction
unexpectedly). When operating on slippery surfaces such as ice or loose
gravel, reduce speed and use extra caution to reduce the chance of skidding or
sliding out of control. Do not operate on excessively slippery surfaces.
When driving on slippery surfaces such as wet trails, loose gravel, or ice, be
alert for the possibility of skidding and sliding. Follow these precautions when
encountering slippery conditions:
1. Do not operate on excessively rough, slippery or loose terrain.
2. Slow down before entering slippery areas.
3. Maintain a high level of alertness, reading the trail and avoiding quick, sharp
turns, which can cause skids.
4. Engage all-wheel drive before wheels begin to lose traction.
NOTICE
Severe damage to the drive train may occur if the AWD is engaged while the
wheels are spinning. Always allow the wheels to stop spinning before engaging
AWD.
5. Correct a skid by turning the steering wheel in the direction of the skid. Never
apply the brakes during a skid.
DRIVING OVER OBSTACLES
Follow these precautions when operating over obstacles:
1. Always check for obstacles before operating in a new area.
2. Look ahead and learn to read the terrain. Be constantly alert for hazards
such as logs, rocks and low hanging branches.
3. Travel slowly and use extra caution when operating on unfamiliar terrain. Not
all obstacles are immediately visible.
4. Move the drive mode switch to low mode if needed.
57
OPERATION