Polaris RANGER 500, Owner'S Manual

Page: 40 / 152

THROTTLE PEDAL
Push the throttle pedal
w
down to increase engine speed. Spring pressure
returns the pedal to the rest position when released. Always check that the
throttle pedal returns normally before starting the engine.
This vehicle is equipped with a throttle release switch, which is designed to
reduce the risk of a frozen or stuck throttle. If the throttle cable should stick in an
open position when the operator releases the throttle pedal, engine speed will
be limited, and power to the rear wheels will be reduced.
PARK BRAKE LEVER (IF EQUIPPED)
Always apply the service brakes before engaging or releasing the park brake. To
help prevent the vehicle from rolling, set the park brake when parking the
vehicle. When the park brake is set and the park brake indicator is illuminated,
engine speed is limited. If the accelerator is applied, this limiting feature
prevents operation, which protects the park brake pads from excessive wear.
TIP
This feature will not operate properly if the park brake connector or switch
(under the hood) malfunctions or becomes disconnected, or if the switch has
moved. Check for disconnection, then see your dealer or other qualified
service person promptly if this feature fails to operate properly.
1. To set the park brake, apply the brakes.
2. Pull the park brake lever upward as far as possible.
3. To release the park brake, apply the brakes. Press the park brake release
inward and move the lever downward as far as possible.
38
FEATURES AND CONTROLS