5
Video mode
When the device is turned on, the device will start recording instantaneously. To
stop recording, press the ok button. To start recording again, press the ok button.
The video resolution that is chosen will determine how much recording time you
will get out of the SD card, for example the lower the resolution the more storage
that will be available on the SD card.
Video mode Settings
To bring up the video mode settings, please ensure that you are already in video
mode (please see
‘about the different modes’
).
1.
Press the menu button once to bring up the video mode features
2.
Use the up/ down buttons to choose which feature you would like to set
3.
Press ok, once the desired feature you wish to setup is highlighted
4.
A sub menu will display on the screen
5.
Use the up / down buttons to select your desired setting
6.
Press ok once the desired setting has been chosen
List of video mode settings
Settings
Description
Comments
Resolution
Set your desired
resolution.
Options:
1080FHD – 1920 x 1080
720P – 1280 x 720
WVGA - 848 x 480
VGA - 640 x 480
Loop
Recording
This feature will allow
you to set up an
automatic continuous
loop in 1, 3, 5 or 10-
minute intervals.
This feature is ideal if you are using
the device purely as an incident
recorder.
For example, if you set the loop
recording to 10 minutes, the device
will record in lots of 10-minute
intervals. Once the SD card is full,
the device will then start recording
over the 10-minute intervals from
the beginning.
WDR
Set Wide dynamic Range
on or off
Ideal for use at night to capture
high quality video where bright
and dark conditions occur together.
Also ideal for capturing number
plates at night.
