Polaris 700 Classic Owner'S Manual Download Page 25

Page: 25 / 133

SAFETY

Safety Decals and Locations

“No Passenger” Warning

Snowmobiles designed for a

single rider only have a warning

decal on the console below the

steering post:

WARNING
This vehicle is designed for

operator only. “NO

PASSENGER”

Passenger Warning

Snowmobiles designed for an operator and one passenger have a

warning decal at the right side of the steering post. For more

information on operating with a passenger, see page 12.

Warming
This vehicle is designed for

operator and “ONE” passenger only.

Track Warning

The track warning decal is on the

rear of the tunnel:

Stay clear of track. Do not sit on

seat back. Entanglement with the

track or a fall from seat back may

result in severe injury or death.

Summary of Contents for 700 Classic






































































































































Search results

Summary of Contents for 700 Classic

Reviews:

Related manuals for 700 Classic

Brands by name

Popular brands

Polaris 700 Classic, Owner'S Manual

Search results

Summary of Contents for 700 Classic

Reviews:

Related manuals for 700 Classic

Brands by name

Popular brands