Polaris 700 Classic Owner'S Manual Download

Page: 10 / 133

SAFETY

Operator Safety

The following signal words and symbols appear throughout this

manual and on your vehicle. Your safety is involved when these words

and symbols are used. Become familiar with their meanings before

reading the manual.

The

safety alert symbol

, on your vehicle or in this manual, alerts

you to the potential for injury.

WARNING

The

safety alert warning

indicates a potential hazard that may

result in serious injury or death.

CAUTION

The

safety alert caution

indicates a potential hazard that may

result in minor injury or damage to the vehicle.

CAUTION

caution

indicates a situation that may result in damage to the

vehicle.

NOTE:

note

will alert you to important information or instructions.

Summary of Contents for 700 Classic






































































































































Search results

Summary of Contents for 700 Classic

Reviews:

Related manuals for 700 Classic

Brands by name

Popular brands

Polaris 700 Classic, Owner'S Manual

Search results

Summary of Contents for 700 Classic

Reviews:

Related manuals for 700 Classic

Brands by name

Popular brands