Polaris 600 Fusion Owner'S Manual Download Page 37

Page: 37 / 145

FEATURES

Instrumentation

MFD Digital Display Programs

Press the MODE button to cycle through the three MFD programs: Per-

formance, Engine and History. Each program will remain in the display

until another is selected.

NOTE:

The analog will always display either MPH or engine RPM

(whichever setting is selected) regardless of the display pro-

gram being viewed.

Performance Program

The Performance Program automatically displays either speed or

tachometer, whichever is opposite the analog display. See page 33. It

also displays electrical system voltage and fuel levels.

While in the Performance mode, press the SET button to cycle through

the odometer, Trip 1, Trip 2, Trip F and Clock settings.

Summary of Contents for 600 Fusion


















































































































































Search results

Summary of Contents for 600 Fusion

Reviews:

Related manuals for 600 Fusion

Brands by name

Popular brands

Polaris 600 Fusion, Owner'S Manual

Search results

Summary of Contents for 600 Fusion

Reviews:

Related manuals for 600 Fusion

Brands by name

Popular brands