Polaris 600 Fusion Owner'S Manual Download Page 135

Page: 135 / 145

132

WARRANTY

Service and Warranty Information

Polaris Anti-Theft System

The Polaris anti-theft system (PATS) monitoring program is designed to aid

owners of registered snowmobiles in recovery of stolen machines.

Administration

1. Polaris snowmobile owner reports theft.

A. In addition to notifying the proper law enforcement officials,

the owner must call Polaris Customer Service.

B. Owners must provide their name, address, telephone num-

ber and the model and serial number of stolen machines.

2. Polaris warranty will provide all dealerships with a monthly updated list of

all stolen units to further monitor thefts.

3. Polaris warranty will aid in notifying the proper owner when a unit is

recovered.

Summary of Contents for 600 Fusion


















































































































































Search results

Summary of Contents for 600 Fusion

Reviews:

Related manuals for 600 Fusion

Brands by name

Popular brands

Polaris 600 Fusion, Owner'S Manual

Search results

Summary of Contents for 600 Fusion

Reviews:

Related manuals for 600 Fusion

Brands by name

Popular brands