Instr 9929140
Rev 01 2018-08
Page 9 of 17
11.
REINSTALL SEAT.
a. Lift the driver side seat latch
A
located behind
seat bottom and firmly press down on seat
bottom to reinstall the driver seat
B
. Once
installed, pull forward on the seat back to
ensure the seat is fully latched and secured
into position.
12.
REINSTALL WINCH COVER.
a. Reinstall lower front winch cover
A
with the
previously removed four push pin rivets
B
.
13.
REINSTALL HOOD.
a. Place hood into position and rotate the two
hood latches to secure into position.
14.
OPTIONAL STEP
- INSTALL WIRELESS
REMOTE.
a. Wireless remote holder can be installed in
desired location on vehicle. Use screws
supplied in the wireless remote kit for holder
installation. Location shown is for
REFERENCE ONLY.
15.
VERIFY WORK.
a. Confirm all electrical wires/connections have
been routed and connected per instructions.
b. Confirm that there are no exposed wires or
terminals.
c. Ensure all loose wires are secured away from
moving parts, sharp edges and heat sources.
