P/N 9925259 Rev 01 05/14 Page 3 of 3
7. Pull cover down as far as possible
down over all four tires as shown in
figure.
8. Ratchet webbing tight. Guide webbing
into spool. Apply about 10-15 ft. lbs.
(13.5-20 Nm) of pressure on the handle.
9. Attach the male buckle (E) of the center
strap to the female buckle sewn to the
cover. Feed the webbing underneath
the machine and connect the buckles
on the opposite side. Cinch tight by
pulling any excess slack underneath
the footwells as shown in figure.
WARNING:
Ensure the cover is adequately tensioned prior to trailering the unit.
Never trailer covered unit in excess of the speed limit.
Trailer the covered unit in a forward facing direction ONLY.
E
