P/N 9925259 Rev 01 05/14 Page 2 of 3
INSTALLATION INSTRUCTIONS
1. Place the vehicle in “
PARK
” and turn
the key to “
OFF
” position. Remove the
key from the vehicle.
2. If a spare tire is in place, remove the
tire and the tie down clamp before
using the cover to trailer.
3. Stow ratchet (A) by connecting the
Velcro on the ratchet webbing to the
Velcro on the cover as shown in figure.
6. Thread rear webbing (C) through loop
(D) in the back and into the ratchet.
Roll ratchet (A) three fourths of the way
and pull snug as shown in figure.
4. Drape the cover over the vehicle.
5. Attach the front buckle (B) as shown in
figure.
A
B
C
D
A
