background image

-2-

P/N 9924776 Rev 01  08/13

WARNING:

Ensure the cover is adequately tensioned prior to trailering the unit.
Never trailer covered unit in excess of the speed limit.

Trailer the covered unit in a forward-facing direction ONLY.

8.  Attach the male buckle of the center strap to the 

female buckle sewn to the cover. Feed the webbing 

underneath the machine and connect the buckles on 

the opposite side. Cinch tight by pulling any excess 

slack underneath the footwells. Figure 5.

6.  Pull cover down as far as possible down over all 

four tires. Figure 4.

7.  Ratchet webbing tight. Guide webbing into spool. 

Apply about 10-15 ft. lbs. (13.5-20 Nm) of pressure 

on the handle.

5.  Thread rear webbing through loop in the back and 

into the ratchet. Roll ratchet three fourths of the 

way and pull snug. Figure 3.

3.  Drape the cover over the vehicle.

4.  Attach the front buckle. Figure 2.

Figure 2

Figure 3

Figure 4

Figure 5

Front Buckle

Rear Loop

Roll Ratchet 

to Tighten

Rear Webbing

 

Center 

Buckle

Reviews: