manualshive.com logo in svg

Polaris 2007 Dragon, Owner'S Manual

The Polaris 2007 Dragon Owner's Manual is a comprehensive manual specifically designed for snowmobile enthusiasts. This free downloadable manual provides detailed instructions on how to operate and maintain the Polaris 2007 Dragon, ensuring a smooth and enjoyable riding experience. Download your free copy from manualshive.com.

Share
Download
background image

85

MAINTENANCE

Spark Plug Condition

Spark plug condition is indicative of engine operation. The spark plug 

firing end condition should be read after the engine has been warmed up 

and the vehicle has been driven at higher speeds. Immediately check the 

spark plug for correct color.

Normal

The normal insulator tip is gray, tan or light brown. There will be few 

combustion deposits. The electrodes are not burned or eroded. This indi-

cates the proper type and heat range for the engine and the service.

NOTE:

The tip should not be white. A white insulator tip indicates over-

heating, caused by use of an improper spark plug or incorrect 

carburetor/throttle body adjustments.

Wet Fouled

The wet fouled insulator tip is black. A damp oil film covers the firing 

end. There may be a carbon layer over the entire nose. Generally, the 

electrodes are not worn. General causes of fouling are excessive oil or 

use of non-recommended injection oil.

Spark Plug Removal

1. Remove the spark plug cap.
2. Using the special wrench provided in 

the tool pouch, rotate the spark plug 

counterclockwise to remove.

3. Reverse the procedure for spark plug 

installation. 

4. Torque to 18-22 ft. lbs. (24-30 Nm).
5. Reinstall the spark plug cap.

WARNING

A hot exhaust system and engine can cause serious burns. Wear protective 

gloves when removing a spark plug for inspection.

Summary of Contents for 2007 Dragon










































































































































Reviews:

No comments

Related manuals for 2007 Dragon

Brands by name

Popular brands

Load more brands