Polaris 2007 Dragon Owner'S Manual Download

Page: 130 / 137

127

WARRANTY

Snowmobile Engine Emissions Limited Warranty

This snowmobile engine emissions limited warranty is in addition to the Polaris stan-

dard limited warranty for snowmobiles.

Polaris Industries Inc. warrants that the new engine, including all parts of its emission-

control system, is designed, built and equipped so it conforms to current U.S. Environ-

mental Protection Agency regulations applicable to snowmobile emissions under 40

CFR1051, 1065 and 1068 at the time of sale to the ultimate purchaser. Polaris warrants

that the engine is free from defects in materials and workmanship that may keep it from

meeting these regulations.

The warranty period for this emissions certified snowmobile engine starts on the date

when the engine is first purchased and continues for 4000 kilometers (2485 miles) of

vehicle travel, 200 hours of operation, or 30 calendar months, whichever comes first.

This engine emissions limited warranty covers the parts and labor charges for repair or

replacement of defective parts that are covered by this warranty. This includes compo-

nents whose failure increases the snowmobile engine's emissions. To the extent they are

present on your snowmobile engine, this includes electronic controls, fuel injection

components, exhaust gas recirculation system components, and aftertreatment system

components. Replacing or repairing other components not covered by this warranty is

the responsibility of the snowmobile owner.

The exclusive remedy for breach of this limited warranty shall be, at the exclusive

option of Polaris, repair or replacement of any defective materials, components or prod-

ucts. THE REMEDIES SET FORTH IN THIS LIMITED WARRANTY ARE THE

ONLY REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS WAR-

RANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR INCI-

DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY

DESCRIPTION,WHETHER ARISING OUT OF EXPRESS OR IMPLIED WAR-

RANTY OR ANY OTHER CONTRACT, NEGLIGENCE OR OTHER TORT OR

OTHERWISE. ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED

TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE WARRANTY

PERIOD DESCRIBED HEREIN. POLARIS DISCLAIMS ALL EXPRESS WARRAN-

TIES NOT STATED IN THIS WARRANTY.

Summary of Contents for 2007 Dragon










































































































































Search results

Summary of Contents for 2007 Dragon

Reviews:

Related manuals for 2007 Dragon

Brands by name

Popular brands

Polaris 2007 Dragon, Owner'S Manual

Search results

Summary of Contents for 2007 Dragon

Reviews:

Related manuals for 2007 Dragon

Brands by name

Popular brands