manualshive.com logo in svg

Polaris 2007 Dragon, Owner'S Manual

The Polaris 2007 Dragon Owner's Manual is a comprehensive manual specifically designed for snowmobile enthusiasts. This free downloadable manual provides detailed instructions on how to operate and maintain the Polaris 2007 Dragon, ensuring a smooth and enjoyable riding experience. Download your free copy from manualshive.com.

Share
Download
background image

133

INDEX

I

Ice and Snow Build-up . . . . . . . . . . .  14
IFS. . . . . . . . . . . . . . . . . . . . . . . . . . .  39

IFS Adjustment Options . . . . . . . . . .  39
IFS Components . . . . . . . . . . . . . . . .  39
Inadequate Snow Conditions  . . . . . .  18

Instrumentation . . . . . . . . . . . . . .  28-38
Intake Filters . . . . . . . . . . . . . . . . . . .  86
Intake Silencer  . . . . . . . . . . . . . . . . .  17

L

Lights  . . . . . . . . . . . . . . . . . . . . .  94-95
Low Oil Indicator Light . . . . . . . . . .  67
Lubrication . . . . . . . . . . . . . . . . .  80-83

M

Maintenance Interval Table  . . . .  77-79
Maintenance Program . . . . . . . . . . . .  76
Maneuverability  . . . . . . . . . . . . . . . .  17

MFD Battery Replacement . . . . .  37-38
MFD Components. . . . . . . . . . . . . . .  28
MFD Digital Display Programs .  30-36

MFD Settings . . . . . . . . . . . . . . . . . .  29

N

Noise . . . . . . . . . . . . . . . . . . . . . . . . . .  5

O

Oil Filter . . . . . . . . . . . . . . . . . . . . . .  83

Oil Injection System . . . . . . . . . . . . .  63
Oil Level . . . . . . . . . . . . . . . . . . . . . .  67
Oil Lines . . . . . . . . . . . . . . . . . . . . . .  83

Oil Recommendations. . . . . . . . . . . .  63
Oil, Engine  . . . . . . . . . . . . . . . . . . . .  67
Operation Warning . . . . . . . . . . .  23-24

Operator Safety . . . . . . . . . . . . . . .  6-20

P

Parking Brake Lever Lock . . . . . . . .  57
Passenger Warnings . . . . . . . . . . . . .  22

Preload, IFS Shock Spring . . . . . . . .  40
Pre-Ride Checklist  . . . . . . . . . . . . . .  54
Pre-Ride Suspension Inspection . . .  110

Pressure Cap Warning  . . . . . . . . . . .  21

R

Rail Slide Wear. . . . . . . . . . . . . . . .  110
Rear Rear Scissor Stop . . . . . . . . . . .  48

Rear Suspension Adjustments  . .   42-44
Rear Suspension Adjustments, IQ 45-49
Rear To Front Coupling . . . . . . . . . .  48

Recoil Rope  . . . . . . . . . . . . . . . . . . .  59
Recommended Maintenance. . . . . . . .  7
Registration, Warranty . . . . . . . . . .  122

Reverse . . . . . . . . . . . . . . . . . . . . . . .  72
Reverse Warning  . . . . . . . . . . . . . . .  23
Rider Capacity  . . . . . . . . . . . . . . . . .  11

Riding Apparel . . . . . . . . . . . . . . . . . .  9
Riding Position . . . . . . . . . . . . . . . . . .  8
RRSS. . . . . . . . . . . . . . . . . . . . . . . . .  48

Safety Decals  . . . . . . . . . . . . . . .   21-24
Safety Symbols . . . . . . . . . . . . . . . . . .  6
Sag  . . . . . . . . . . . . . . . . . . . . . . . . . .  44

Shock Compression Damping, IFS. .  41
Shock Compression Damping, IQ  . .  46
Shock Valving, IFS. . . . . . . . . . . . . .  41

Signal Words  . . . . . . . . . . . . . . . . . . .  6
Ski Alignment. . . . . . . . . . . . . . . . .  108
Ski Skags  . . . . . . . . . . . . . . . . . . . .  109

S

Slide Rail and Track Cooling . . . . . .  65
Snow Conditions. . . . . . . . . . . . . . . .  18
Spark Plug Condition . . . . . . . . . . . .  85

Spark Plug Removal . . . . . . . . . . . . .  85
Spark Plugs . . . . . . . . . . . . . . . . . . . .  84
Speed. . . . . . . . . . . . . . . . . . . . . . . . .  11

Spring Preload, IFS Shock . . . . . . . .  40
Spring Preload, Rear. . . . . . . . . . . . .  44
Starting the Engine . . . . . . . . . . . . . .  61

Starting, Emergency . . . . . . . . . . . . .  71
Steering Inspection/Adjustment . . .  107
Steering System  . . . . . . . .   58, 107-110

Stopping, Emergency . . . . . . . . . . . .  70
Storage, Daily . . . . . . . . . . . . . . . . . .  73
Storage, Extended . . . . . . . . . .   111-113

Studs . . . . . . . . . . . . . . . . . . . . . . . . .  52
Survival Preparation . . . . . . . . . . . . .  10

Summary of Contents for 2007 Dragon










































































































































Reviews:

No comments

Related manuals for 2007 Dragon

Yamaha RX10K Assembly Manual preview
RX10K
Brand: Yamaha Pages: 98

Brands by name

Popular brands

Load more brands