Polaris 2005 Sportsman 6x6 Owner'S Manual For Maintenance And Safety Download Page 28

Page: 28 / 136

SAFETY

Operator Safety

WARNING

POTENTIAL HAZARD
Operating on frozen bodies of water.
WHAT CAN HAPPEN
Severe injury or death can result if the vehicle and/or the operator

fall through the ice.
HOW TO AVOID THE HAZARD
Never operate the vehicle on a frozen body of water.

WARNING

POTENTIAL HAZARD
Operating the vehicle after consuming alcohol or drugs.
WHAT CAN HAPPEN
Consumption of alcohol and/or drugs could seriously affect

operator judgment. Reaction time may be slower and operator

balance and perception could be affected.
Consuming alcohol and/or drugs before or while operating the

vehicle could result in an accident and cause severe injury or

death.
HOW TO AVOID THE HAZARD
Never consume alcohol or drugs before or while operating the

vehicle.

Summary of Contents for 2005 Sportsman 6x6









































































































































Search results

Summary of Contents for 2005 Sportsman 6x6

Reviews:

Related manuals for 2005 Sportsman 6x6

Brands by name

Popular brands

Polaris 2005 Sportsman 6x6, Owner'S Manual For Maintenance And Safety

Search results

Summary of Contents for 2005 Sportsman 6x6

Reviews:

Related manuals for 2005 Sportsman 6x6

Brands by name

Popular brands