Polaris 2004 Sportsman 6x6 Page 76 Owner'S Manual For Maintenance And Safety Download

Page: 76 / 131

MAINTENANCE AND LUBRICATION

Tool Kit

To help you perform routine maintenance, a tool kit is provided in the

storage compartment under the seat. Items included in the kit are:

Screwdriver

Open end wrench (8-10 mm)

Open end wrench (12-14 mm)

Box end wrench

Tire pressure gauge

Spark plug wrench and handle

Torx wrench (rack removal)

Accessories

Polaris has a wide variety of accessories for your vehicle. Contact your

Polaris dealer for a complete list.
The addition of certain accessories, including (but not limited to)

mowers, blades, tires, sprayers, or large racks may change the handling

characteristics of the vehicle. Be sure any accessories added to the

vehicle have been approved by Polaris. Familiarize yourself with their

function and effect on the vehicle.

Summary of Contents for 2004 Sportsman 6x6




































































































































Search results

Summary of Contents for 2004 Sportsman 6x6

Reviews:

Related manuals for 2004 Sportsman 6x6

Brands by name

Popular brands

Polaris 2004 Sportsman 6x6, Owner'S Manual For Maintenance And Safety

Search results

Summary of Contents for 2004 Sportsman 6x6

Reviews:

Related manuals for 2004 Sportsman 6x6

Brands by name

Popular brands