Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your POLAR product.
Pack Contents
The following is included:
POLAR prides itself on quality and service, ensuring that at the time of packaging the contents are supplied
fully functional and free of damage.
Should you find any damage as a result of transit, please contact your POLAR dealer immediately.
Installation
1.
Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces.
2.
Maintain a distance of 2cm (0.7 inches) between the unit and walls or other objects for ventilation.
Increase this distance if the obstacle is a heat source.
Operation
Control Panel
The control panel is located on the front of the appliance.
Turn On
1.
Close the door of the appliance.
2.
Connect the appliance to a mains power supply.
3.
Set the temperature to the desired setting: 0 (Off), 1 (Cool) to 7 (Cold)
Storing Food
To get the best results from your POLAR appliance, follow these instructions:
•
Only store foodstuffs in the appliance when it has reached the correct operating temperature.
•
Do not place uncovered hot food or liquid inside the appliance.
Note: If the unit has not been moved or stored in an upright position, let it stand upright
for approximately 12 hours before operation. If in doubt allow the appliance to stand.
Note: Before using the appliance for the first time, clean the shelves and interior with
soapy water.
•
POLAR Refrigerator / Freezer
•
Shelves - Refrigerator only
CD610-A/ CD080-A x 3/ CD086 x 3
CD612-A/ CD082-A x 4 / CD087 x 4
CD614-A x 4 / CD084-A / CD088 x 4
•
Keys x 2
•
Spacers x 2
•
Instruction manual
