S T E P - B Y - S T E P I N S T R U C T I O N S
F O R S E T T I N G T H E A L A R M
1. In the time of day display,
press
the
SET
button twice.
The letters
ALM
and the alarm
time, 10:00, will appear on
the display, as shown (or
any other previously set
alarm time).
2. The AM or PM indicator is
flashing now.
3. At this point, select AM or PM
as you did above, by pressing
the
SELECT
button
.
4.
Press
STORE/LAP
to lock in your choice.
5. At this point, the first two digits, representing
the hours, are flashing.
6. Set the correct hour by moving up with
the
SELECT
button
or down with
the
SIGNAL/
LIGHT
button
.
7. When the correct hour is displayed,
press
the
STORE/LAP
button
to lock in your
selection.
8. The full ten minutes digit is flashing now.
Again, use
the
SELECT
button
to move up,
or
the
SIGNAL/LIGHT
button
to move
down.
4. At this point, the first two digits (representing
the hours) are flashing.
5. Set the correct hour by moving
up with the
S E L E C T
b u t t o n
or
d o w n w i t h t h e
SIGNAL
button.
6. When the correct hour is displayed,
press
the
STORE/LAP
button
to lock in your
selection.
7. The full ten minutes digit flashes now. Again,
use
the
SELECT
button
to move up, or
the
SIGNAL/LIGHT
button
to move down.
8. When the correct number is displayed,
press the
STORE/LAP
button
to lock in
your selection.
9. The one minutes digit is flashing now. Again,
use
the
SELECT
button to move up
, or
the
SIGNAL/LIGHT
button
to move down.
10. When the number you want is displayed,
press the
STORE/LAP
button
to lock in
your selection. The two digits representing
seconds are zeroes.
11. At this point the
AM/PM
indicator will start
flashing again, and the seconds start running
from double zero. You can start over at step 2
to repeat the time setting procedure or move to
setting the alarm by pressing
t h e
S E T /
START/STOP
button
.
14
15
STORE/LAP
PROTRAINER NV
AM
AM
