Chapter 3
The Polar3D printer local web
interface
If you are controlling your Polar3D printer directly through its
local WiFi (see Section
) rather than going through the Po-
lar Cloud, then the printer’s local web interface will be your
main control interface. From a device on your local network
(computer, tablet, or phone), simply open a browser window
connecting to the printer’s local IP address
and you will be at
the printer local web interface.
If you connect your printer to the Polar Cloud, then after
performing its initial connection (see Chapter
), you likely will
seldom have a need or interest in connecting directly to the
printer’s local web interface. However, the printer’s local web
interface is still accessible. If you are on the same local network
as the printer, you may simply open up a browser window and
connect to its local IP address without going through the Polar
Cloud. Or from within the Polar Cloud, navigate from the main
1
For a discussion of the printer’s local IP address, see Section
address (for connecting to local web interface)
of the
57
