Polar Electro Polar3D Manual Download Page 117

Page: 117 / 170

Chapter 7

Troubleshooting for Polar3D
printers

The

Polar3D support

website has a number of

articles

and

videos

discussing commonly encountered issues. You can also open a
support ticket at that site.

7.1

Polar3D printer LED lights

In addition to the small, white lights around the camera un-
derneath the

print head

which are the very first lights to turn

on when the printer is plugged in, the Polar3D printer has LED
lights running vertically on the left hand side, with “

POLAR

” gen-

erally showing in blue when the printer is turned on (plugged
in), and with the color of “

” being an indication of the state of

the printer. (Printer firmware updates or restarts are indicated
with special coloring of the entire “

POLAR3D

” display: green for

firmware updates, or white for firmware restarts.)

108

Summary of Contents for Polar3D











































































































































































Search results

Summary of Contents for Polar3D

Reviews:

Related manuals for Polar3D

Brands by name

Popular brands

Polar Electro Polar3D, Manual

Search results

Summary of Contents for Polar3D

Reviews:

Related manuals for Polar3D

Brands by name

Popular brands