Polar Electro Polar3D, Manual, Page: 44 / 170

CHAPTER 2. START PRINTING 35
while within the Polar Cloud. From the Polar Cloud
main menu, expand the left-hand menu and click on
“
PRINTERS
”, then click on the image of the printer
you are loading with filament; this will take you to the
printer’s dashboard screen. At that printer dashboard
screen, click on the “
LOCAL UI
” button (gear icon) at
the upper right, to navigate to the printer’s local web
interface; see Figure
2.3 .)
Figure 2.3: Polar Cloud printer dashboard
LOCAL UI
button
At the printer local web interface, click on the “
Controls
”
tab from the vertical menu on the right (Figure 2.4 ) to
get to the “
Manual Printer Controls
” screen (Figure
2.5 ). At the “
Manual Printer Controls
” screen, en-
ter a temperature of 185
°
C and click the “
SET
” button;
see Figure 2.5 .
Figure 2.4: Printer local web interface
Controls
tab