manualshive.com logo in svg

Polar Electro BodyAge, Setup Manual

Share
Download
Polar Electro BodyAge Setup Manual Download Page 6

Accessories 

The following is a list of all the items included with your system.  These are 
standard items included with every system.  You may have other items as part of 
you individual order. 
 
1.  Polar heart rate transmitter belt and elastic strap 

 

2.  Strength handle and strength strap assembly 

 

3.  On-line Skyndex Skinfold calipers w/calibration 

dowel as shown on the caliper hanger on the 
monitor tray. (Lange calipers are an optional 
upgrade)  

 
4.  15” Flat Panel LCD monitor w/speakers 

 

5. Keyboard 

 

6. Mouse 

 

7.  Hewlett Packard DeskJet printer 

 

8.  6 foot power cord attached for the cart power 

 

9.  BodyAge System computer installed in the cart (if 

ordered) 
 

10. BodyAge System cart with integrated range  

of motion (ROM) unit 
 

11. Heart rate receiver and 8’ HR cable  

(if no bike was purchased).   
If bike was purchased, a split receiver/RPM cable is included 
 

12. Platform/scale  

 

13. 2 Allen wrenches for assembly/repair. 

 

 

14. BodyAge System Fitness Assessment software  

 

6

Summary of Contents for BodyAge










































Reviews:

No comments

Brands by name

Popular brands

Load more brands