Polar Electro 7314-2030, Instruction Manual

Page: 6 / 8

6
TRACK MODE OPERATION
(((((((( )))))))) ((((((( )))))))
((…((… …))…)) ((…((… …)) …))
START
*Note 1
*Note 2
*Note 3
(System initial)
Setting target torque
Current torque value
Current torque value
Green LED
Reach 80% of target torque
Red LED
Approached target torque
Buzzer
Buzzer
Reach 80% of target torque
Reach target torque
Apply torque
Note:
1. If appears, it means the wrench is
overloaded. Overload = 110% of maximum
torque. Please contact your local dealer for
recalibration.
2. When 80% of the target torque is reached,
the green LED will begin to flash and the
alarm tone will beep intermittently.
3. When the target torque is approached, the
alarm will change to a steady tone and the
green LED will stop flashing and stay on.
The red LED will also illuminate.
(System indicate)
Setting target torque
Apply torque
Apply torque
Current torque value
(Peak hold)
Released
Recording
Flashing
Buzzer
Buzzer
Green LED
Reached 80% of target torque
Red LED
Approaching target torque
Reached 80% of target torque
Reached target torque
START
PEAK HOLD MODE OPERATION
(((((((( )))))))) ((((((( )))))))
((…((… …))…)) ((…((… …)) …))
*Note 1
*Note 2
*Note 3
*Note 4
Note:
1. If appears, it means the wrench is
overloaded. Overload = 110% of maximum
torque. Please contact your local dealer for
recalibration.
2. If
is appeared, that means the
wrench’s memory is full and the next value
record can not be written in. Please refer
the “Peak hold mode recorded value review”
section to clear the memory records.
3. When 80% of the target torque is reached,
the green LED will begin to flash and the
alarm tone will beep intermittently.
4. When the target torque is approached, the
alarm will change to a steady tone and the
green LED will stop flashing and stay on.
The red LED will also illuminate.