MAINTENANCE AND STORAGE
BATTERY MAINTENANCE
■
When the wrench is not going to be used for an
extended period of time, remove the batteries.
■
Keep a spare battery on hand when going on a
long trip or to cold areas.
■
Do not mix battery types or combine used
batteries with new ones.
■
Sweat, oil and water can prevent a battery’s
terminal from making electrical contact.
To avoid this, wipe both terminals before loading a
battery.
■
Dispose of batteries in a designated disposal
area. Do not throw batteries into a fire.
Caution:
1. Over-torquing (110% of Max. torque range)
could cause breakage or lose of accuracy.
2. Do not shake violently or drop wrench.
3. Do not use this wrench as a hammer.
4. Do not leave this wrench in any place
exposed to excessive heat, humidity, or
direct sunlight.
5. Do not use this apparatus in water (it is not
waterproof).
6. If the wrench gets wet, wipe it with a dry
towel as soon as possible. The salt in
seawater can be especially damaging.
7. Do not use organic solvents, such as
alcohol or paint thinner when cleaning
the wrench
8. Keep this wrench away from magnets.
9. Do not expose this wrench to dust or sand
as this could cause serious damage.
10. Do not apply excessive force to the LCD
panel.
11. Apply torque slowly and grasp the center
of the handle. Do not apply load to the
end of the handle.
Attention!
One-year periodic recalibration is necessary to maintain
accuracy. Please contact your local dealer for calibra-
tions.
POLAR TOOLS A/S
SOLDALEN 9 . 7100 VEJLE . DENMARK . [email protected] . WWW.POLARTOOLS.COM
