Polar Air VTAC, Installation, Operation & Service Manual

Page: 9 / 19

Utility Closet Connection Locations
-
8
-
IMPORTANT:
Plan and locate plenum, wall plug, drains and thermostat carefully to
avoid interference
.
Hard-to-reach locations will make installation and service difficult!
Reference Dimensions
A Thermostat cable
B Power cord: 60" long
C Case width and depth: 23-1/8"
D Case height: 31"
E Condensate drains: 3/4"connector
•
Primary Drain - Centerline of
cutout is approximately 5-1/4"
from left case wall and 8-1/2" from
back case wall.
•
Secondary Drain-centerline of
cutout is approximately 6-1/2"
from left case wall and 5-1/4" from
back case wall.
F Typical wall plug: 6"-12" above case
G Room air sensor kit: 10' long.
H 40" min.
Flex duct may be used
for transitions only
Use rigid duct for
90° bends and tees
Outside wall
G
A
B
C C
D
E
230/208 or
265 VAC
wall receptacle
or conduit for
direct Connection
Platform
F
H
Connecting the
air outlet
Connecting the
air outlet