10. HOB FUNCTIONS
Child lock
This function prevents accidental use of the appliance
To enable: if a pan is on the hob, press and hold the corresponding digit for 3 seconds. If there is
no pan on the hob, press and hold for 3 seconds one of the digits (not visible) next to point
on
the left side. Release and slide your finger from 0 to 9 along the power bar which displays the oper-
ating sequence. All the digits indicate
.
The operations described must be completed within 10 seconds.
To disable: press and hold for 3 seconds one of the digits in the cooking areas. Release and slide
your finger from 9 to 0 along the power bar which displays the operating sequence.
The operations described must be completed within 10 seconds.
Lock
Used to lock the cooker hob settings for 15 seconds to allow rapid cleaning.
To enable: press the Digits
of the front right and front left cooking areas simultaneously. The
Display in the Timer management controls area shows the 15 second countdown and lights up
.
To disable: press
or wait 15 seconds.
Boost function
Both the cooking areas and the Hood can be set to extra power.
To enable: both for the hood and for the cooking areas, press “9” on the power bar twice. The cor-
responding Digit displays
.
To disable: select one of the other possible values on the power bar.
Cooking zone
timer
The timer allows a specific cooking area to be switched off when the set time expires.
The cooking areas can be programmed individually because each one has its own timer.
To enable: With the cooking area in operation, press to access the timer management controls for
that zone.
Press the Digits in the Timer controls area one at a time, setting the values individually by selecting
them on the power bar (Minimum 1 minute - Maximum 99 minutes).
Confirmation takes place after 10 seconds without action.
The Display in the Timer management controls area shows the countdown, if it has been set. Oth-
erwise it displays “ C L “ as standard. All the areas can have a Timer set, and the display will al-
ways show the one with the shortest time remaining.
Repeat the operations described to modify the Timer value.
To disable: with the cooking area in operation, press to access the timer management controls for
that zone.
Set the Timer values to zero or press the On/Off key.
Timer (generic)
Timer with alarm for generic use.
To enable: with the hob turned on and with no pans present, press the Digits in the Timer controls
area one at a time, setting the values individually by selecting them on the power bar (Minimum 1
minute - Maximum 99 minutes).
The Display in the Timer management controls area shows the countdown, if it has been set. Oth-
erwise it displays “ C L “ as standard.
To disable: set the timer values to zero or press
twice with the hob turned off.
13
