How to install the Impulse Drive
1. In addition to the Allen keys supplied
with the Impulse Drive, you will need a
phillips screw driver and a wrench.
3. Fit the clear shield onto the drive as
shown above, and align the screw hole
on the shield with the one on the drive.
2. Fasten the pedals to the drive using the
large allen key. Fasten tightly.
4. Attach the shield to the drive using the
screw, washer and nut and tighten it
with an allen key.
5. Use the phillips screw driver to remove
the drive-well plate in the KingFisher,
6. Unscrew the nuts and take off the wash-
ers from the Fasteners, these will not be
needed.
