BF9500
车载台使用说明书
In order to use this transceiver for fixed station operation,you will need a separate 13.8V DC power supply
(not included), The recommended current capacity of your power supply is 15A.
1)
Connect the DC power cable to the regulated DC power supply and ensure that the polarities are correct. (Red: positive,
Black:negative).
·Do not directly connect the transceiver to an AC outlet.
·Use the supplied DC power cable to connect the transceiver to a regulated power supply.
·Do not substitute a cable with smaller gauge wires.
2)
Connect the transceiver's DC power connector to the connector on the DC power cable.
·press the connectors firmly together until the locking tab clicks.
◆
Before connecting the DC power to the transceiver, be sure to switch the transceiver and the DC power supply OFF.
◆
Do not plug the DC power supply into an AC outlet until you make all connections.
■
REPLACING FUSES
If the fuse blows, determine the cause, then correct the problem. After the problem is resolved, replace the fuse. If newly
installed fuses continue to blow, disconnect the power cable and contact your authorized POFUNG dealer or an authorized
POFUNG service center for assistance.
Fuse Location
Fuse Current Rating
Summary of Contents for BF9500
Page 35: ...BF9500...
