- 20 -
1200_GB-HEBEL_3752
MAINTENANCE AND SERVICE
GB
Changing the Cutter Blades
1. Insert lever from left or right side on the cutter
disc ”Pos A” until it stops.
2. Swing lever from ”pos. A” to ”pos. B” and push
the movable holder (30) down.
3. Remove cutter blade (M)
Storing the lever
- Place lever in the respective holding pouch and
secure.
- Place box of blades (K) in the holder and secure after
use.
5. Check:
• blade bolts (31) for damage, wear and fitting
• holder (30) for damage, change in position and fitting
• borehole (32) for damage.
- Side surfaces must not show signs of
deformation
6. Install cutter blades
Pos
A
Pos
B
4. Clean forage remains and dirt away.
- around the bolts (31) and inside the borehole (32)
7. Visual check! Check that blade (M) is correctly
positioned between blade bolts (31) and holder
(30)
(see diagram)
.
8. Swivel lever (H) to ”A” again and remove.
K
H
