- 12 -
1500-GB EINSATZ_3752
GB
STARTING WORK
Important
notes prior
to starting
work
Safety information:
see Supplement
A, pt. 1. - 7.)
The cutter
blades of
the disc
mower are
freely accessible.
Maximum danger
of injury exists.
That why you
should mount the
protection ele-
ments mentioned
under the section
"Protection be-
hind".
NOVACAT 351 F
NOVACAT 261 F
NOVACAT 301 F
Help when the PTO shaft cannot be coupled on
left rotation on the operating tractor:
- Remove transmission (G2), turn it 180° and refit it.
TD 79/98/53
G2
Set cutting height
1)
With upper link (O):
only for disc mowing
Altering the upper link length (L +/-) enables a cutting height
difference of between 3 to 6 cm.
Note!
When parking mower, bring triangular
mounting frame back to vertical position.
• After the first
operating hour
• Retighten screw
fittings for all
knives.
With high-cut skids:
Use when cutting height exceeds 6 cm.
Mowing
Be advised!
Check all safety devices!
Stones and other objects can be picked
up and ejected when mowing. Direct all
persons out of the danger area.
Side protection must be properly folded
down and secured!
1. Set cutting height by turning upper link spindle
(max. 5° incline for mower discs)
2. For mowing, slowly engage the p.t.o. shaft
away from the crop and bring the mower rotor
up to full speed.
Smoothly increasing the p.t.o. speed will avoid system-
related noises from the p.t.o. shaft free-running.
- The driving speed depends on the ground conditions
and the crop to be mown.
Reversing
Raise the mower when reversing!
