-6-
6.
GETTING STARTED
6.1 BATTERY INSTALLATION.
Remove the screw securing the cover in place.
Please note
it is important that a good
quality leak resistant alkaline PP3 battery battery is fitted correctly and the battery cover is
secured back in place.
6.2 MAINS CONNECTION
Insert the adaptor plug into the rear of the answer machine. Then plug the mains adaptor
into the wall socket. The unit will beep and the display will count from 0 to 15 & “CL” and
0 will be alternately shown in the display.
6.3 SETTING THE CLOCK
Press and hold the CLOCK key, until the unit announces the day. Then release the
CLOCK key.
To set the day, press the >> key or the << key until the correct day, is heard, then press
the CLOCK key.
To set the hours, press the >> key or the << key until the correct hour is heard, then press
the CLOCK key.
To set the minutes, press the >> key or << key until the correct minute are heard and then
press the CLOCK key. The answer machine will announce the day and time. To change
the setting, repeat the above procedure.
6.4 RECORDING THE OUT GOING MESSAGE (OGM)
Press and hold the OGM key until the answer machine beeps, release the button. Hold
the answer machine approx 10 to 15 cm and recite your message into the answer
machine.
The answer machine will display the how many seconds the message has taken. The
message length must not be longer than 60 Seconds. After the OGM has been
completed, press the STOP key.
The answer machine will replay your OGM, repeat the above procedure if you need to
make changes to your OGM.
6.5 ANSWER MACHINE CONNECTIONS
Plug the white connector on your telephone into the telephone socket on the rear of the
answer machine. Plug the white connector from the rear of the answer machine into the
telephone wall socket.
6.6 SWITCHING THE ANSWER MACHINE ON
Pressing the ON / OFF button will toggle between on and off & the display will show “ On ”
and “ OF ” for a short period when the answer machine is switched on or off.
AN200A.ISS1.03.10.00
