Aug/07
MN2036400001
6
Device Connection
The PCI Express Dual Channel SATA II RAID Card supports two
Serial ATA hard disk drives. It is recommended to use identical drives
for all RAID configurations.
RAID Arrays
RAID Arrays are set up in the card’s on-board BIOS. Refer to the
following steps for proper configuration of RAID Arrays.
RAID 0 (Striping)
This RAID array is to be used on
New/Blank
hard drives. Striping will
destroy any existing data on the hard drive.
Auto Configuration
is
recommended. For applications that require custom chunk size, please
use
Manual Configuration
.
Auto configuration (recommended)
The default chunk size is
64k
when
Auto configuration
is selected.
1.
As the BIOS boots press
Ctrl+S
or
F4
when prompted to enter
the RAID BIOS.
2.
At the next screen select
Create RAID Set
, then press
Enter
.
3.
Select
RAID0
, then press
Enter
.
