installation.
For An Existing Installation
1.
Setup the RAID Array prior to driver installation and boot up to
Windows.
2.
At the
Found New Hardware Wizard
, select
No, not this time
,
then click
Next
.
3.
Insert the provided driver CD into your CD-ROM Drive, select
Install the software automatically (Recommended)
, and click
Next
.
4.
Accept the default entry, then click
Next
.
5.
Click
Finish
.
6.
Repeat steps
2-5
.
7.
Click
Yes
to restart to complete the installation.
For Windows® Vista
For New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the
PCI_IO\SiI3132\Driver\RAID\FLOPPY” folder, found on the
driver CD, onto a blank floppy disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
Aug/07
MN2036400001
17
