Aug/07
MN2036400001
14
CD-ROM drives
, uncheck the other boxes, click
Next
, then click
Next
again.
5.
If the
Digital Signature Not Found
message appears, click
Yes
.
Our driver has been thoroughly tested for stability and
compatibility.
6.
Click
Next
, then
Finish
.
7.
Repeat steps
2-6
.
8.
Click
Yes
to restart to complete the installation.
For Windows® XP/Server 2003
For New Installation
A new installation requires a floppy disk for the driver
installation. To make this floppy disk, copy the contents of
the “
PCI_IO\SiI3132\Driver\RAID\FLOPPY” folder, found on the
driver CD, onto a blank floppy disk then follow the directions below.
1.
Setup the RAID Array prior to Windows installation.
2.
Follow Microsoft’s Windows installation procedure.
3.
Restart the computer when prompted by Windows’ installation.
4.
At the Windows Setup screen, press
F6
to install the RAID driver.
5.
When prompted, press
S
to specify the location of the driver.
6.
Insert the floppy disk, then press
Enter
.
