-8-
Photos:
Short press the Camera Button (below picture) to take pictures. The LED Camera indicator will blink on the remote as
well as on the drone.
Videos:
Press the Camera button for 3 seconds to start taking videos. The LED Camera indicator will blink continously on the
remote as well as on the drone. To stop recording press the Camera button again for 3 seconds until the LED Camera
indicator stops blinking.
Tip: The SD Card slot is located under the drone. All photos and videos are saved on the SD Card (not included)
Photo And vidEo
Maintenance
- The battery should be kept in a dry, ventilated place. The storage temperature is between 18 ° C and 25 ° C. Avoid
excessive charging and discharging to prolong battery life. Be sure to charge the battery before storing it, if it is left
unused for a long time.
- To avoid any problems, we strongly advise you to take the habit of also removing the battery of the drone when not in
use.
- Keep your equipment in a dry place, away from water and heat. Do not place the drone on a wet surface or in the vicinity
of liquid substances. This could cause irreversible damage.
- Maintenance can only be carried out by the After Sales Service of the warehouse or distributor. If you have a problem
with your drone, please contact us directly. It is not recommended to change the engine or the motherboard on your
own.
- Use only accessories specified by the manufacturer.
- Find all our products and accessories on our website www.pnj.fr
Summary of Contents for R-Nano HD
Page 16: ......