5
Install the unit by screwing
six
screws.
Battery Connection
CAUTION:
To safety operation and regulation compliance, it’s requested to install a separate DC over
-current
protector or disconnect device between battery and inverter. It may not be requested to have a disconnect
device in some applica
tions, however, it’s still requested to have over
-current protection installed. Please refer
to typical amperage in below table as required fuse or beaker size.
WARNING!
All wiring must be performed by a qualified personnel.
WARNING!
It's very important for system safety and efficient operation to use
appropriate cable for battery connection. To reduce risk of injury, please use the
proper recommended cable and terminal size as below.
