24
6. The unit won’t lift a patient
This happens when there is a leak somewhere usually in one of
the air hoses. Start by putting full air into the unit listen for air
releasing. Find the leak. If it is an air hose to a
fi
tting push the
hose into the
fi
tting.
7. Nothing is turning on or working
This happens on some models when the charger is still plugged
in. Unplug it.
8. I can’t adjust the width
Make sure the gold pins on the front of the unit are pulled out
fully and the wheels on one side are locked. Lifting the unit
while pulling it to one side can help. See page 13 in this Pneu
‐
Walker™ Assembly Instruction Manual
If you need to call for technical support 800
‐
447
‐
5792 please
have the information below ready
The ser.#
Your Company
Your Phone#
Your E
‐
Your Rehab Contact
