19
Wheels
PneuWalkers™ are shipped without wheels attached.
To attach wheels:
1. Lay PneuWalker™ unit on it’s side
2. Locate wheels in packing. There is a
set marked front and a set marked back
3. Lock wheels
Wheels must be in locked position before
screwing into threaded holes on bottom of
unit. Push down on black tab until wheel
movement is locked.
4. Insert into hole, screw in a clockwise direction until wheel is
fl
ush
with bottom support bar.
5. Repeat with remaining wheels
6. Turn unit upright and unlock wheel by lifting up on black tab (by
hand or with
foot)
The Contained Air System must be charged before use. You must
plug in the charger each night. Failure may result in a dead battery.
Batteries as consumables are excluded from warranty.
Locked
Unlocked
